AAP Industries Stainless Steel 316/316L ‘Table E’ Blind Flanges

Stainless Steel 316/316L ‘Table E’ Blind Flanges
General Information

Stainless Steel Table ‘E					’ Blind Flanges 316/316L
AAP CODE	IMPERIAL SIZE	A	B		C	BOLT SIZE	HOLE DIAMETER	NO. HOLES	APPROX KG/PC
SSFBE31625	1	115	83.0	10	.6	M12	14	4	0.6
SSFBE31632	1 1/4	120	87.0	10	.6	M12	14	4	0.7
SSFBE31640	1 1/2	135	98.0	10	.6	M12	14	4	1.0
SSFBE31650	2	150	114.0	10	.6	M16	18	4	1.4
SSFBE31665	2 1/2	165	127.0	10	.6	M16	18	4	1.7
SSFBE31680	3	185	146.0	11	.6	M16	18	4	2.4
SSFBE31694	4	215	178.0	14	.0	M16	18	8	3.7
SSFBE31696	6	280	235.0	17	.5	M20	22	8	8.0
SSFBE31698	8	335	292.0	20	.0	M20	22	8	13.0

Chemical Composition of ASTM A182 F316L Stainless Steel Buttweld
C MAX (%)	Si MAX (%)	Mn MAX (%)	P MAX (%)	S MAX (%)	Cr (%)	Mo (%)	Ni (%)	N MAX (%)
0.03	1	2.00	0.05	0.03	16.00-18.00	2.00-3.00	10.00-15.00	0.1

Mechanical Properties of ASTM A182 F316L Stainless Steel Buttweld at Room Temperature
Tensile Strength N/mm_	Yield Point Rp0.2 N/mm_ ≥	A5 % ≥
≥ 485	170.00	30.00

Wall Thickness ASTM A312M
PIPE SIZE	Schedule 10S		Schedule 40S
	304/304L & 316/316L	304/304L & 316/316L
NPS	OUTSIDE DIAMETER	WALL THICKNESS (mm)	OUTSIDE DIAMETER	WALL THICKNESS (mm)
1/8	10.29	1.24	10.29	1.73
1/4	13.72	1.65	13.72	2.24
3/8	17.15	1.65	17.15	2.31
1/2	21.34	2.11	21.34	2.77
3/4	26.67	2.11	26.67	2.87
1	33.41	2.77	33.41	3.38
1 1/4	42.16	2.77	42.16	3.56
1 1/2	48.26	2.77	48.26	3.68
2	60.3	2.77	60.3	3.91
2 1/2	73.03	3.05	73.03	5.16
3	88.9	3.05	88.9	5.49
4	114.3	3.05	114.3	6.02
6	168.28	3.40	168.28	7.11
8	219.18	3.76	219.18	8.18

Standard Tolerances ANSI B-16.9
ALL FITTINGS	90-DEG AND 45-DEG ELBOWS AND TEES	REDUCERS
NOMINAL PIPE SIZE INCH	OUTSIDE DIAMETER AT END	INSIDE DIAMETER AT END	WALL THICKNESS	CENTRE TO END	OVERALL LENGTH
1/2 TO 2 1/2	+ 1/16	± 1/32	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 1/16	±1/16
	- 1/32	± 1/32	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 1/16	±1/16
3 TO 4	±1/16	±1/16	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 1/16	±1/16
5 TO 8	+ 3/32	±1/16	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32
	- 1/16	± 1/8	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32
10 TO 18	+ 5/32	± 1/8	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32
	-1/8	± 1/8	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32
20 TO 24	+1/4	± 3/16	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32
	-3/16	± 3/16	NOT LESS THAN 87.5% OF NOMINAL THICKNESS	± 3/32	± 3/32

Your name *

Your email *

Subject: *

Enquiry *

Irrigation Unit Conversions

Convert a given value and unit to different unit type. Conversions are available for flow rate, area, distance, time, volume, pressure, power, precipitation, salinity, and speed.

Click here to see unit descriptions.

Flow Rate:
		to

Area:
		to

Distance:
		to

Time:
		to

Volume:
		to

Pressure:
		to

Power:
		to

Precipitation (Water Application) Rate:
		to

Salinity:
		to

Speed:
		to

Reference: Washington State University

AAP Industries Stainless Steel 316/316L ‘Table E’ Blind Flanges

[8] STAINLESS STEEL BUTTWELD FITTINGS & FLANGES

Specifications

Irrigation Unit Conversions

Payment options