Marani FT100A Hydraulic Drive Hard Hose Irrigator

Overview

The Marani FT100A is a heavy-duty hydraulic drive hard hose irrigator engineered by Marani Irrigazione, an Italian manufacturer with a long-standing reputation for precision agricultural irrigation equipment. Designed specifically for large-scale field irrigation, the FT100A accommodates polyethylene hose diameters ranging from 110 mm to 140 mm (4.33 in to 5.51 in) and hose lengths stretching up to 850 metres (2,789 ft), making it one of the most capable machines in the Marani hard hose traveller range. The unit is powered entirely by a hydraulic system connected to the tractor, eliminating the need for a separate engine and offering reliable, consistent field performance across demanding terrain.

What distinguishes the FT100A is its combination of operational scale with genuine ease of use — a balance that Marani has deliberately engineered into every system on this machine. The four-speed synchronised gearbox, telescopic hydraulic feet, hydraulic lifting of both the trolley and drawbar, and the Computer Aqua System automation all reduce operator workload while maintaining precise control over water application rates. The hot-galvanised chassis and reel provide long-term corrosion resistance, while the choice between REFLEX and EXPLORER raingun configurations allows the machine to be tailored to the specific agronomic and hydraulic requirements of each installation. Whether irrigating broad arable crops, fodder production, or large horticultural plots, the FT100A delivers a thoughtful cost-to-benefit ratio at the high end of field irrigator performance.

Key Features & Benefits

Four-Speed Synchronised Gearbox: Provides precise control over hose retraction speed, enabling operators to fine-tune water application depth to match crop and soil requirements across a wide range of flow conditions.
Computer Aqua System with Solar Panel: An integrated automation controller powered by an on-board solar panel manages the irrigation cycle autonomously, reducing the need for constant operator supervision and improving application consistency.
Hydraulic Lifting System (Trolley, Drawbar & Telescopic Feet): All major lifting operations — including the raingun trolley, drawbar, and stabilising feet — are hydraulically actuated via the tractor's hydraulic circuit, significantly reducing manual effort during setup and pack-down.
Turbine Flanged on Gearbox with Double Built-In By-Pass: The turbine is directly flanged to the gearbox with a double by-pass system, providing smooth hydraulic drive regulation and protecting the machine during pressure fluctuations.
Hot-Galvanised Chassis and Reel: The entire chassis and reel are hot-dip galvanised for superior corrosion resistance, ensuring a long service life even under frequent field use and exposure to fertiliser-enriched water.
Galvanised Raingun Trolley with Variable Track Wheels and Automatic Stabiliser Leg: The raingun cart runs on variable track wheels designed to lay the hose precisely on the tractor wheel track, while the automatic stabiliser leg ensures the gun remains correctly positioned throughout the pull.
Hydraulic Lateral Reverse Pull: Enables the machine to operate effectively on non-linear field layouts by allowing lateral pull adjustment, increasing versatility across irregular plot shapes.
Double Chain Hose Retraction System: Hose is retrieved via a robust double chain drive mechanism, providing even tension and reliable winding performance across the full hose length, including configurations up to 850 m (2,789 ft).
Dual Raingun Compatibility — REFLEX and EXPLORER: The machine is supplied with nozzle sets for both the REFLEX (Ø 24 to Ø 32) and EXPLORER (Ø 28 to Ø 40) rainguns, giving operators flexibility to optimise coverage diameter and flow rate for specific field conditions.
Polyethylene Hose from Unadulterated Raw Material: The PE hose is manufactured from virgin raw material only, ensuring consistent wall thickness, pressure integrity, and long-term flexibility without degradation from recycled additives.

Technical Specifications

Specification	Detail
Manufacturer	Marani Irrigazione
Model	FT100A
Country of Manufacture	Italy
Product Type	Hydraulic Drive Hard Hose Irrigator
Drive System	Hydraulic — connected to tractor via rapid couplings; turbine flanged on gearbox with double built-in by-pass
Gearbox	4 synchronised speed gearbox with power take off
Hose Diameter Range	110 mm – 140 mm (4.33 in – 5.51 in)
Hose Length Range	500 m – 850 m (1,640 ft – 2,789 ft)
Raingun Options	REFLEX (nozzles Ø 24 – Ø 32) / EXPLORER (nozzles Ø 28 – Ø 40)
Hose Retraction	Double chain
Wheels	4 × 15.0/70-18 148A8 14PR 6F
Chassis	4-wheel configuration; hot-galvanised chassis and reel
Stabilisation	Telescopic hydraulic feet; double stabiliser legs on drawbar; automatic gun-cart stabiliser leg
Water Inlet	Galvanised double water inlet with Bauer 133 connection
Automation	Computer Aqua System with solar panel
Safety	Steel safety guards, swaged galvanised and painted
Hose Material	Polyethylene from unadulterated virgin raw material

Available Hose Configurations

Hose Diameter	Hose Length	Raingun	Nozzle Range (mm)	End Hose Code	Performance Data
110 mm (4.33 in)	800 m (2,625 ft)	REFLEX	26 / 28 / 30	E	110FV9800.pdf
110 mm (4.33 in)	850 m (2,789 ft)	REFLEX	26 / 28 / 30	C	110FV9850.pdf
125 mm (4.92 in)	650 m (2,133 ft)	EXPLORER	30 / 32 / 34	H	125FV9650.pdf
125 mm (4.92 in)	680 m (2,231 ft)	EXPLORER	28 / 30 / 32	J	125FV9680.pdf
125 mm (4.92 in)	790 m (2,592 ft)	EXPLORER	28 / 30 / 32	H	125FV9790.pdf
135 mm (5.31 in)	550 m (1,804 ft)	EXPLORER	34 / 36 / 38	A	135FV9550.pdf
140 mm (5.51 in)	500 m (1,640 ft)	EXPLORER	34 / 36 / 38	C	140FV9500.pdf
140 mm (5.51 in)	530 m (1,739 ft)	EXPLORER	34 / 36 / 38	B	140FV9530.pdf

Machine Dimensions

FT100A Dimensions

Diagram shows dimension reference points (A, B, C, etc.) on the machine.

Dimension	cm	inches
A	505 cm	198.8 in
B	428 cm	168.5 in
C	—	—
D	378 cm	148.8 in
E	265 cm	104.3 in
F	—	—
G	345 cm	135.8 in
H	250 cm	98.4 in
I	260 cm (min) – 275 cm (max)	102.4 in (min) – 108.3 in (max)

Ideal Applications

Large Arable Crop Irrigation: With hose runs of up to 850 m (2,789 ft) and high-flow EXPLORER rainguns available, the FT100A is well suited to irrigating extensive cereal, maize, and oilseed crops where long lateral coverage is essential.
Fodder and Pasture Production: The machine's adjustable retraction speeds and broad nozzle range allow precise application rates on grass and fodder crops, supporting consistent yield across multiple cuts per season.
Large-Scale Horticultural Plots: The combination of Computer Aqua System automation and flexible hose configurations makes the FT100A practical for vegetable and specialty crop operations requiring reliable, scheduled irrigation over significant acreage.
Irrigated Agricultural Estates and Cooperatives: The machine's robust galvanised construction, dual raingun compatibility, and wide hose diameter range make it appropriate for shared use across large farming operations with diverse field types and water source pressures.
Sugar Beet and Industrial Crop Production: High-volume water delivery via 135 mm and 140 mm (5.31–5.51 in) hose configurations with large-diameter EXPLORER nozzles supports the deep watering requirements of high water demand crops such as sugar beet and industrial root crops.
Irregular and Non-Linear Field Layouts: The hydraulic lateral reverse pull feature and variable track raingun troll

Your name *

Your email *

Subject: *

Enquiry *

Irrigation Unit Conversions

Convert a given value and unit to different unit type. Conversions are available for flow rate, area, distance, time, volume, pressure, power, precipitation, salinity, and speed.

Click here to see unit descriptions.

Flow Rate:
		to

Area:
		to

Distance:
		to

Time:
		to

Volume:
		to

Pressure:
		to

Power:
		to

Precipitation (Water Application) Rate:
		to

Salinity:
		to

Speed:
		to

Reference: Washington State University

Feature Title	Feature	Benefit
Fully Hydraulic Operation	The FT100A features hydraulic lifting of the trolley, telescopic feet, and drawbar, all connected to the tractor via rapid couplings.	Every major adjustment — from levelling to positioning — is controlled from the tractor seat, eliminating manual labour and reducing setup time significantly.
4-Speed Gearbox	A 4-synchronized-speed gearbox with power take-off drive provides precise reel winding speed control.	Fine-tuned speed selection allows the operator to accurately match water application rates to different crop types and soil conditions, maximising irrigation efficiency.
Turbine with Dual By-Pass	A water-powered turbine is flanged directly onto the gearbox and features a double built-in by-pass valve.	The dual by-pass system ensures consistent reel speed even as water pressure fluctuates, delivering uniform water distribution across the entire run.
Multiple Nozzle Options	Includes two full nozzle sets — REFLEX raingun (Ø24 to Ø32) and EXPLORER raingun (Ø28 to Ø40) — supplied as standard equipment.	A wide combined nozzle range gives operators the flexibility to adapt flow rates and throw distances to suit varying field sizes, crops, and water supply conditions without additional purchases.
Aqua Computer System	The integrated Computer Aqua System with dedicated solar panel automates and monitors the irrigation run electronically.	Solar-powered automation removes the need for manual intervention during operation, allowing the irrigator to run unattended and freeing the operator for other tasks.
Hydraulic Lateral Reverse Pull	An integrated hydraulic lateral reverse pull mechanism is built into the machine's drive system.	Enables the hose cart to be retrieved from offset field positions hydraulically, expanding the effective working width and reducing repositioning moves.
Double Chain Hose Retraction	Hose retraction is driven by a dual-chain mechanism ensuring even tension and load distribution across the reel drum.	Balanced retraction forces reduce wear on the hose and reel components, extending service life and maintaining consistent layering of the hose on the drum.
Auto-Stabilising Gun Cart	The galvanised raingun trolley is mounted on variable-track wheels and equipped with an automatic gun-cart stabilizer leg.	Automatic stabilisation keeps the raingun level and correctly positioned during operation, ensuring consistent spray pattern quality without manual adjustment.
Hot-Dip Galvanised Construction	Both the chassis and reel drum are hot-dip galvanised, with steel safety guards that are swaged, galvanised, and painted.	Full galvanisation of structural components provides long-term corrosion resistance in wet and chemically challenging field environments, protecting the investment over decades of use.
Heavy-Duty 4-Wheel Chassis	The FT100A rides on a four-wheel chassis fitted with 15.0/70-18 148A8 14PR 6F tyres and dual drawbar stabilizer legs for anchoring during operation.	Large-footprint agricultural tyres and solid anchoring legs keep the machine stable on soft or uneven ground, preventing movement during high-pressure irrigation runs.
Premium Polyethylene Hose	The irrigation hose is manufactured from unadulterated raw polyethylene material with a galvanised double water inlet and Bauer 133 connection fitting.	Virgin-grade PE material ensures maximum hose flexibility, pressure resistance, and longevity, while the standardised Bauer fitting simplifies connection to existing farm infrastructure.

Picture

Feature Title

Feature

Benefit

Fully Hydraulic Operation

The FT100A features hydraulic lifting of the trolley, telescopic feet, and drawbar, all connected to the tractor via rapid couplings.

Every major adjustment — from levelling to positioning — is controlled from the tractor seat, eliminating manual labour and reducing setup time significantly.

4-Speed Gearbox

A 4-synchronized-speed gearbox with power take-off drive provides precise reel winding speed control.

Fine-tuned speed selection allows the operator to accurately match water application rates to different crop types and soil conditions, maximising irrigation efficiency.

Turbine with Dual By-Pass

A water-powered turbine is flanged directly onto the gearbox and features a double built-in by-pass valve.

The dual by-pass system ensures consistent reel speed even as water pressure fluctuates, delivering uniform water distribution across the entire run.

Multiple Nozzle Options

Includes two full nozzle sets — REFLEX raingun (Ø24 to Ø32) and EXPLORER raingun (Ø28 to Ø40) — supplied as standard equipment.

A wide combined nozzle range gives operators the flexibility to adapt flow rates and throw distances to suit varying field sizes, crops, and water supply conditions without additional purchases.

Aqua Computer System

The integrated Computer Aqua System with dedicated solar panel automates and monitors the irrigation run electronically.

Solar-powered automation removes the need for manual intervention during operation, allowing the irrigator to run unattended and freeing the operator for other tasks.

Hydraulic Lateral Reverse Pull

An integrated hydraulic lateral reverse pull mechanism is built into the machine's drive system.

Enables the hose cart to be retrieved from offset field positions hydraulically, expanding the effective working width and reducing repositioning moves.

Double Chain Hose Retraction

Hose retraction is driven by a dual-chain mechanism ensuring even tension and load distribution across the reel drum.

Balanced retraction forces reduce wear on the hose and reel components, extending service life and maintaining consistent layering of the hose on the drum.

Auto-Stabilising Gun Cart

The galvanised raingun trolley is mounted on variable-track wheels and equipped with an automatic gun-cart stabilizer leg.

Automatic stabilisation keeps the raingun level and correctly positioned during operation, ensuring consistent spray pattern quality without manual adjustment.

Hot-Dip Galvanised Construction

Both the chassis and reel drum are hot-dip galvanised, with steel safety guards that are swaged, galvanised, and painted.

Full galvanisation of structural components provides long-term corrosion resistance in wet and chemically challenging field environments, protecting the investment over decades of use.

Heavy-Duty 4-Wheel Chassis

The FT100A rides on a four-wheel chassis fitted with 15.0/70-18 148A8 14PR 6F tyres and dual drawbar stabilizer legs for anchoring during operation.

Large-footprint agricultural tyres and solid anchoring legs keep the machine stable on soft or uneven ground, preventing movement during high-pressure irrigation runs.

Premium Polyethylene Hose

The irrigation hose is manufactured from unadulterated raw polyethylene material with a galvanised double water inlet and Bauer 133 connection fitting.

Virgin-grade PE material ensures maximum hose flexibility, pressure resistance, and longevity, while the standardised Bauer fitting simplifies connection to existing farm infrastructure.